How to avoid friction of linear guide rail

In most cases, fluid lubrication is limited to the boundary area, and direct friction caused by metal contact is inevitable. In this friction, a lot of energy is wasted by friction loss.

In most cases, grease lubrication is sufficient, which makes it particularly easy to plan the lubrication system and use and maintain the machine tool. In particular, the sliding block of the rotating linear guide rail has a micro gap or negative gap with the guide rail, which can greatly improve the overall rigidity and moving accuracy of the guide rail|* I allow large load) g slider and guide rail are precision together into a whole, with high rigidity, four deflections and other loads, so they have greater load-bearing ability. Easy maintenance \ "HIWIN's innovative E2 self-lubricating module product combines the detachable view, so that the linear guide rail can extend its maintenance cycle. The E2 self-lubricating module has the characteristics of cost saving, clean and environmental protection, and is mobile, easy to disassemble and easy to maintain. The transparent oil tank plan can check the oil volume at any time, and can choose the responsive lubricating oil. It can be used in special situations such as dust, bad weather and water use.

Hiwine2 self-lubricating module can not only increase the convenience of user maintenance, but also its modular plan allows customers to directly purchase E2 self-lubricating module kit and place it on the slider to achieve the effect of lubricating parts. The machine plan is highly efficient, and the deviation of the placement surface is received due to the elastic deformation of the steel ball in the rotating linear guide rail, so that the flatness requirements of the basic surface of the guide rail placement can be reduced, and the machining cost can be reduced. The linear guide rail has the characteristics of receiving after averaging the verticality, flatness, intersection and other straightening deviations generated during the processing and assembly of the bottom of the guide rail. Therefore, the adoption of linear guide rail can greatly improve the effectiveness of machine planning.

The friction loss of the rolling surface is also reduced correspondingly, so the linear rolling guide rail system can be in a high-precision state for a long time.